< Back

How to set up Surfshark smart DNS for Apple TV

Here's a guide that'll cover some simple steps to configure Surfshark smart DNS on your Apple TV. If you haven't activated smart DNS yet, check out this guide first.

Let's dive in! 🌊

1. First of all, open up settings on your Apple TV!

2. Now, select "network", and proceed. 

3.  If your Apple TV is on Wi-FI, click on Wi-Fi as shown in the screenshot below: 

Or maybe you're using Ethernet to surf the waves of the internet. 🌊 In that case, it will look like this: 

4. Now if you are using Wi-Fi, you will have to click on the network that you are connected to: 

5. Select the option "Configure DNS

6. On the next page, select "Manual" for the DNS configuration. 

7. Now, you will be able to enter the DNS address that is available on your profile page where you activated smart DNS.

Add 0 in front if needed (as in the picture below).



That's it! You're now ready to open up the new waters of the internet! 😎

Was this article helpful?