In this article, you will learn how to set up a manual connection with a Dedicated IP.
If you still don't have a Dedicated IP, you can get it on our Dedicated IP order page.
NOTE: Only 1 Dedicated IP can be purchased per account.
NOTE: A manual connection method using a Dedicated IP is available on IKEv2, OpenVPN, and WireGuard protocols.
Follow these steps:
- Open the Surfshark dashboard and log into your account.
- Under the Dedicated IP section, click on Settings.
- Pick a protocol you wish to connect via a manual connection. In this example, we will be downloading a WireGuard configuration file.
- In the new pop-up, you will find the IP, your Public key, and a download button. Copy both the IP Address and the Public key for your setup. Then, click on the download button.
- For manual Dedicated IP connection setups, you must use their credentials, which are available once you click on the configuration file.
- Lastly, you will need to set up the whole manual connection. Select your device and a protocol below for a manual setup guide:
- Windows WireGuard, Windows OpenVPN
- macOS WireGuard, macOS OpenVPN, macOS IKEv2
- Android WireGuard, Android OpenVPN, Android IKEv2
- iOS WireGuard, iOS OpenVPN, iOS IKEv2
- Linux OpenVPN, Linux WireGuard
You may also be interested in: